Decomission a Windows 2003 or 2008 Domain Controller

To decommission an Active Directory Domain Controller (Windows Server 2003/2008) is a fairly straightforward task so long as you make sure nothing is relying on that server specifically. I will cover off the demotions steps (fairly easy) but I will go through a checklist (and how-to) of gotchas that you might get caught out when doing this.

UPDATE: 27/09/2019 – Quick update to say that this is definitely the most popular comment on my blog. Thank you all for the all the comments, and please do keep them coming. The more comments i get, the more likely i will start to write articles again.

What to check before demoting your DC?

The most important things to look out for are the following components that are either running or registered against the system:

  • Global Catalog
  • FSMO Roles
  • Bridgehead server
  • General server checks
  • You have enterprise admin credentials

Global Catalog

If you remove the last remaining Global Catalog server from a domain, you will experience logon issues across the domain along with other functions like searches and lookups.

If you remove the last Global Catalog server from a site, users/machines will have to contact a Global Catalog server from a different site. This may not cause problems with small branch offices, however large sites may suffer with the additional overhead in traffic.

To check what servers are functioning as a Domain Controller in your domain, type the following command:

dsquery server -domain #DomainName# | dsget server -isgc -dnsname

Note: replace #DomainName# with the domain of the DC that you are demoting. The output should look similar to this:

dsquery server Global Catalog

If you have more than just the DC that you are preparing the demote, then you have nothing else to do as the DCPROMO steps will remove it automatically. If you don’t have any more, follow MS article 296882 to make another DC a GC.

Resources:

FSMO roles

Flexible Single Master Operation roles (FSMO) are a feature of Microsoft’s Active Directory and you need to make sure they are not present on the server you are demoting.

To check that the the current server is not a FSMO role holder, simply run the following command:

netdom query fsmo

The output should look similar to this:

netdom query fsmo

If none of the server names are the one you are demoting then you have nothing else to do. If you are then follow the MS KB Article 324801 noted below.

Resources:

Bridgehead Server

As Microsoft have described it here, ‘A bridgehead server is a domain controller that has been either administratively assigned or automatically chosen to replicate changes collected from other domain controllers in the site to bridgehead servers in other sites.’ If you have multiple sites you want to make sure the server you are demoting is not a Bridgehead server. To check if this server is, run the following command on the server console that is being demoted:

repadmin /bridgeheads

The output should be all the bridgeheads that are configured on that server. If it looks like the below screenshot, then you dont have any configured, otherwise you will need to reconfigure this before proceeding.

bridgehead single server

To do a whole check on the site, simply extend the command to

repadmin /bridgeheads site:#sitename#

where #sitename# is the name if the Active Directory site. The output for that looks like this:

bridgehead server site wide

Resources:

General Server Checks

There are some general server checks that you should run on your servers/domain to make sure it is healthy before running a DCPromo. There are a couple of reports that give you plenty of info, and they are quite easy to read. Search for the term ‘error’ or ‘fail’ on dcdiag and netdiag reports to locate the problem areas, but i do recommend reading through the entire logs to familiarise yourself.

DCDiag (part of WS03 SP1 Support tools) displays all information about Domain Controller information.

dcdiag.exe /V /C /D /E /s:#DomainControllerName# > c:\dcdiag.log
NetDiag provides information about specific network configuration for the local machine.

netdiag.exe /v > c:\netdiag.log

RepAdmin helps diagnise AD replication issues with WS03 and WS08 DC’s.

repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt

DNSLint is a Microsoft Windows utility that helps you to diagnose common DNS name resolution issues.

nslint /ad /s #IPAddressOfServer#

Resources

Admin Credentials

There are two types of Administrator Credentials you may need to use:

If you need to move all FSMO roles the logged-on user should be a member of the Enterprise Administrators group. This is required to transfer Schema master or Domain naming master roles.The rest of the operations can be done with a user who is a member of the Domain Administrators group.

How to decommission a Windows Server 2003/2008

The procedure involved is fairly straight forward so I will only document the steps. For more details and screenshots of the steps, refer to the resources below.

To demote a domain controller

  1. On a domain controller, click Start, and then click Run.
  2. In Open (or Run), type dcpromo to open the Active Directory Installation Wizard, and then click Next.
  3. On the Remove Active Directory page, click Next, and then continue to follow the wizard.

Resources

Having Problems?

So you may have tried the above steps and it didn’t work? Or maybe your server crashed and you don’t want to try recovering it? There are a number of reasons why you may end up in this scenario – although not favorable its not all doom and gloom. Below are some resources to get you out of a pickle.

19 thoughts on “Decomission a Windows 2003 or 2008 Domain Controller”

  1. very appreciating post.

    However, in single-site, single-forest environment, how to add/modify the new DNS IP in domain workstation’s NIC?
    and
    how to remove “decommissioned/demoted DC IP” from workstations NIC settings accordingly?

    Best Regard.

    Reply
    • Hi Mullah, even in a single-site, single-forest, the process in this article is focused all around removing an old domain controller, while maintaining a new domain controller.

      In order to replace DNS Server IP’s on clients, there are 3 high level steps required:
      1. Provision DHCP on new server and transition role from one to another – remember you cant have overlapping DHCP otherwise it creates conflict
      2. Update the DNS server IPs in DHCP scope, either after transition or during
      3. Update static DNS server IPs on clients/workstations/etc

      With regards to point 3, there are several approaches to make this easier.
      1. use remote PowerShell on all windows devices to see if its statically assigned (audit), and dynamic updating of the setting.
      2. assign a second IP address to the Domain Controller. Then configure your clients to use that specific IP both statically and dynamically. This allows you to change IP Config on the DC’s and move those DNS requests to a different server.
      3. Assign the old Domain Controller IP Address to the new server, after it has been demoted and removed from the network.

      Also thanks for the comment.

      Reply
  2. Thank you Ivan. this is very useful information for me as I am going to decommission Windows Server2008 R2 DC.

    Reply
  3. Ivan this is the most comprehensive and easy to follow instructions I found to demote my old Windows 2003 domain controller. My Windows 2012 server has never been setup properly. I look forward to reviewing your blog for additional help on those issues.

    Reply
  4. Comprehensive, articulate, everything you need to know. I missed the NTP setting, hence the thank-you-so-much post.

    Reply
  5. I got this error:
    Before you can install or remove Active Directory, you must remove Certificate Services. For information about the consequences of removing Certificate Services, see Help and Support.

    Reply
  6. Thank you, This was really helpful.
    To add, also make sure dns server on 2003 server is pointing to new dns server instead of itself.
    And stopping netlogon service

    Reply

Leave a Reply to GeoCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

QR Code Business Card